Oil facturing proppant of good quality and low price

Oil Fracturing Ceramic proppant is one of our featured products and we specialize in it for almost 10 years.

Ceramic proppant is the key material in low-permeability fracturing of oil and gas wells exploration. This products used in the construction of deep well fracturing, be filled to the low permeability of the rock deposits in the cracks, fracturing close to the high oil recovery operations, so that oil and gas cracked rock, support for propping fractures not close because of releasing force, thereby to maintain the high conductivity of oil and gas, not only can increase the oil and gas production output, also can extend the oil and gas wellss length of service.

 

Our oil Proppant are divided according to the anti-crushing strength into 52Mpa (105KN), 69Mpa (140KN), and 86Mpa, (174KN) three series, according to bulk density are divided into: low-density, medium density, high-density. Product specifications are : 16-20 mesh ,16-30 mesh, 20-40 mesh between 30-50 mesh and so on.

 

 

 

Grade[μm]	Bulk Density	Crush Resistance Test	Crush Resistance Test	Crush Resistance Test	Roundness	Sphericity	Apparent Density	Turbidity	Acid Solubility
	[g/cm3]	103MPa	69MPa	52MPa			[g/cm3]	[FTU]	HC:HF=12:3
850-425(20-40mesh)	1.66-1.80	Null	≤8%	≤5%	≥0.80	≥0.80	3.01-3.35	≤100	≤8%
600-300(30-50mesh)	1.66-1.80	Null	≤6%	Null	≥0.80	≥0.80	3.01-3.35	≤100	≤8%
425-212(40-70mesh)	1.66-1.80	≤10%	≤6%	Null	≥0.80	≥0.80	3.01-3.35	≤100	≤8%

 

Screen Analysis
425-212(40-70mesh)	(425-212) μm	≥90%
	≤ 212μm	≤2.0%
	≥600μm	≤0.1%
	(250-212) μm	≤10%
600-300(30-50mesh)	(600-300) μm	≥90%
	≤300μm	≤2.0%
	≥850μm	≤0.1%
	(355-300) μm	≤10%
850-425(20-40mesh)	(850-425) μm	≥90%
	≤425μm	≤2.0%
	≥1180μm	≤0.1%
	(500-425) μm	≤10%

 

 

 

 

We can also produce ceramic proppants of different specifications according to clients' particular requirements.

 

 

: